Radar Tank Gauging Accessories
4400 Radar Display Unit (7200 RTGs only)
An optional display unit can be used for indication and programming up to 20 m (65 ft) away from the radar unit. It is available for installation in non-hazardous areas or with additional safety approvals.
Antenna Extension
An antenna extension is used to extend the antenna (horn) below the nozzle of the tank.
Weather Protection Cover
A weather protective cover made of stainless steel is available for outdoor mounting (order code: 543199- 0001).
UNI Flange
Varec UNI flanges are designed for non-pressurized operation. Typical pressure fluctuations of breather valves can be tolerated.
Sample Hatch
A sample hatch is used for access to the tank without taking the RTG off the tank flange, for example, cleaning the antenna or hand dipping (tape). The construction is only suitable for non-pressurized operation.
Pivoting Element
The pivoting element is intended for the 7500 Series Radar Tank Gauge with planar antenna. It serves to swivel the 7500 Series Radar Tank Gauge from the measuring position, e.g. to clean the antenna or dip the tank.
Configuration and Service Tools
Contact a Varec representative to identify which service tools suit your requirements - Commubox FXA291, Commubox FXA195 or Service Interface FXA193.
Roof Reflector
A special reflector can
be used for applications on floating roofs.
Note! Measurements on floating roofs are not recommended
for highly accurate measurements due to the unsteady
movements of the floating roofs.
