|
The 5010 MTG can be calibrated and setup using:
when connected via MODBUS or DDA protocol to a 8130 Remote
Terminal Unit (RTU) or 8300 TankGate Interface (TGI).
when connected via MODBUS directly to FuelsManager.
via a laptop connected to the gauge (see accessories).
The 5020 MTG can be calibrated and setup using:
from any point in the loop
via a laptop connected to the gauge (see accessories)
The 5030 MTG can be calibrated and setup using:
from any point in the loop
via a laptop connected to the gauge (see accessories)
Note! 5030 MTGs located within the sealed instrument enclosure allow for zero and span adjustment
by placing the supplied calibration magnet in the appropriate recess at the bottom of the
electronics housing.
The 5010 MTG can be calibrated and setup using:
when connected via MODBUS or DDA protocol to a 8130 Remote Terminal Unit (RTU) or 8300 TankGate Interface (TGI)
via a laptop connected to the gauge (see accessories)
|
MTG Product Links 
